24小时服务热线： 15677114556 18978820229
1×1 Optical Switch
◇ Application
●Metropolitan Area Network
●R&D in Laboratory
●System Monitoring
●Configurable OADM
Route States
Dimensions
◇ Performance
Parameters |
| OSW-1×1 |
Wavelength Range | nm | 650~1310 | 1260~1670 |
Testing Wavelength | nm | 650/780/850/980/1064/1310 | 1310/1490/1550/1625/1650 |
Insertion Loss | dB | Typ:0.6,Max:1.0 | Typ:0.5 ,Max:0.8 |
Return Loss | dB | ≥50 | ≥50 |
Crosstalk | dB | ≥60 | ≥60 |
PDL | dB | ≤0.05 |
WDL | dB | ≤0.25 |
TDL | dB | ≤0.25 |
Repeatability | dB | ≤±0.005 |
Power supply | v | 3.0 or 5.0 |
Lifetime | Cycle | ≥107 |
Switch Time | ms | ≤5 |
Transmission Power | mW | ≤500 |
Operation Temperature | ℃ | -≤±0.005 |
Storage Temperature | ℃ | -40~+85 |
Weight | g | 16 |
Dimension | mm | (L)27×(W)12.6×(H)8.5(±0.2) |
Pins
Type | Optical Route | Electric Drive | Status Sensor |
1×1 |
| Pin 1 | Pin 5 | Pin 6 | Pin 10 | Pin 2-3 | Pin 3-4 | Pin 7-8 | Pin 8-9 |
Latching | Light close | -- | -- | GND | V+ | Close | Open | Open | Close |
P1-P2 | V+ | GND | -- | -- | Open | Close | Close | Open |
Non -latching | Light close | -- | -- | -- | -- | Close | Open | Open | Close |
P1-P2 | V+ | -- | -- | GND | Open | Close | Close | Open |
Electrical parameters
| Voltage | current | Resistor |
5V Latching | 4.5~5.5 | 36~44mA | 125Ω |
5V Non-Latching | 4.5~5.5 | 26~32mA | 175Ω |
3V Latching | 2.7~3.3 | 54~66mA | 50Ω |
3V Non-Latching | 2.7~3.3 | 39~47mA | 70Ω |
Ordering Information：OSW－1×1－A－B－C－D－E－F－G
A | B | C | D | E | F | G |
Mode | Wavelength | Voltage | Control Model | Fiber Diameter | Fiber Length | Connector |
SM:9/125um M5: 50/125um M6: 62.5/125um | 85: 850nm 13: 1310nm 14: 1490nm 15: 1550nm 162: 1625nm 165: 1650nm 13/15:1310/1550nm | 3: 3V 5: 5V | L: Latching N:Non-Latching | 25:250um 90:900um
| 05:0.5m 10:1.0m 15:1.5m | OO:None FP: FC/PC FA: FC/APC SP: SC/PC SA: SC/APC LP: LC/PC LA: LC/APC
|
